Description

AW-CTD322 Two Wire Conventional Heat Detector

 Operating Voltage Range: 9 to 28 VDC Volts Non-polarized
• Maximum Alarm Current(LED on):_48mA@24VDC
• Operating Temperature Range: -10oC to 70oC
• Fix Temperature Range: 60oC
• Rate of Rise Alarm: 7.1?oC/5S
• Height: 31.78mm installed in Base
• Diameter: 99.45mm

AW-CTD322 Two Wire Conventional Heat Detector Heat Detection: The primary function of the detector is to sense elevated temperatures or rapid temperature increases within its immediate environment. It is designed to respond to heat conditions rather than smoke or flames.
AW-CTD322 Two Wire Conventional Heat Detector has Two-Wire Design: This heat detector operates using a two-wire configuration, simplifying installation and reducing wiring complexity. The two wires typically provide both power and communication between the detector and the fire alarm control panel.
AW-CTD322 Two Wire Conventional Heat Detector has Fixed Temperature or Rate-of-Rise: Heat detectors can operate in two main modes: fixed temperature or rate-of-rise. Fixed temperature detectors activate when a specific pre-set temperature threshold is reached, while rate-of-rise detectors activate when the temperature rises rapidly within a short period.
AW-CTD322 Two Wire Conventional Heat Detector Alarm Signaling: When the heat detector detects an abnormal increase in temperature, it triggers an alarm signal. This signal is sent to the connected fire alarm control panel, which then initiates the appropriate emergency response, such as sounding alarms and notifying authorities.
AW-CTD322 Two Wire Conventional Heat Detector has Visual Indication: Many heat detectors include a visual indicator (often an LED) that activates when the detector is in alarm mode. This provides a visual cue to alert building occupants and responders.
AW-CTD322 Two Wire Conventional Heat Detector Temperature Rating: The AW-CTD322 heat detector is designed to operate within a specified temperature range. This range depends on the model and application, ensuring the detector’s reliability in various environmental conditions.
AW-CTD322 Two Wire Conventional Heat Detector Mounting: Heat detectors are typically ceiling-mounted or wall-mounted in locations where temperature changes are expected to occur slowly, such as kitchens, boiler rooms, and industrial settings.
AW-CTD322 Two Wire Conventional Heat Detector Compatibility: The AW-CTD322 is designed for use within a conventional fire alarm system. It is compatible with other components of the system, such as manual call points, smoke detectors, and the fire alarm control panel.
AW-CTD322 Two Wire Conventional Heat Detector Tamper Resistance: Heat detectors are often designed to be tamper-resistant, making it difficult for unauthorized individuals to disable or tamper with the device.
AW-CTD322 Two Wire Conventional Heat Detector Compliance: The detector is typically manufactured to meet relevant fire safety standards and regulations, ensuring its reliability and performance in fire detection.