Description

Ubiquiti Networks PowerBeam ac High-Performance airMAX Bridge- PBE-5AC-620

The Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge is suitable for CPE deployments requiring maximum performance. A dish reflector design with proprietary airMAX ac technology, offers improved latency, noise immunity, scalability, and significantly increased throughput performance of up to 450+ Mb/s and also offers wide range of 19+ mi (30+ km). The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance while eliminating cable losses. Ubiquiti’s airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the Ubiquiti Networks PBE-5AC-620 scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

The Ubiquiti Networks PBE-5AC-620 ac’s enhanced beam directivity provides optimal performance in high-noise environments. The TDMA airMAX protocol enables optimal scalability, high throughput, and low latency in unlicensed, multi-point networks. Ubiquiti Networks PBE-5AC-620 supports airMAX ac protocol and has a long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Integrated airMAX ac technology boosts the advantages of proprietary TDMA protocol. The mounting bracket of the Ubiquiti Networks PBE-5AC-620 offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt.

Ubiquiti Networks PBE-5AC-620 noise immunity

The Ubiquiti Networks PBE-5AC-620 ac directs RF energy in a tighter beamwidth. With the focus in one direction, the Ubiquiti Networks PBE-5AC-620 blocks or spatially filters out noise, to improve noise immunity. This feature is important in an area crowded with other RF signals of the same or similar frequency.

Ubiquiti Networks PBE-5AC-620 has an integrated design

The Ubiquiti Networks PBE-5AC-620 comes with Ubiquiti’s InnerFeed technology which integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because the Ubiquiti Networks PBE-5AC-620 eliminates cable losses. Featuring high performance and innovative mechanical design, the Ubiquiti Networks PBE-5AC-620 is versatile and cost-effective to deploy.

Ubiquiti Networks PBE-5AC-620 airOS

Designed for improved usability, airOS v7 is the enhanced operating system for Ubiquiti Networks PBE-5AC-620. Ubiquiti Networks PBE-5AC-620 supports airMAX ac protocol and has long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Additionally, this Ubiquiti Networks PBE-5AC-620 features automatic/manual transmit power control, automatic distance selection (ACK timing), and a strong WPA2 security.

Ubiquiti Networks PBE-5AC-620 usability enhancements

Ubiquiti Networks PBE-5AC-620 airOS offers usability enhancements such as dynamic configuration changes*, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including Ethernet cabling test, RF diagnostics, and airView spectrum analyzer. 

Ubiquiti Networks PBE-5AC-620 has advanced RF analytics

Ubiquiti Networks PBE-5AC-620 devices feature a multi-radio architecture to power an enhanced RF analytics engine. An independent processor on the Ubiquiti Networks PBE-5AC-620 powers a second, dedicated radio, which analyzes the full 5 GHz spectrum and every received symbol to provide you with the advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the main tab and airView Spectrum analyzer of airOS V7.

Ubiquiti Networks PBE-5AC-620 prvides real-time reporting

The main tab on the Ubiquiti Networks PBE-5AC-620 displays the RF information such as, persistent RF Error Vector Magnitude (EVM) constellation diagrams, Carrier to Interference-plus-Noise Ratio (CINR) histograms, and Signal-to-Noise Ratio (SNR) time series plots.

Ubiquiti Networks PBE-5AC-620 spectral analysis

Ubiquiti Networks PBE-5AC-620 comes with airView which allows you to identify noise signatures and plan your networks to minimize noise interference. airView constantly monitors environmental noise, collects energy data points in real-time spectral views, and helps optimize channel selection, network design, and wireless performance. airView runs in the background without disabling the wireless link, so there is no disruption to the network.

In airView, there are three spectral views, each of which represents different data. Waterfall represents aggregate energy collected for each frequency, Waveform represents aggregate energy collected, and ambient noise level background represents noise energy shown as a function of frequency. airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.

Ubiquiti Networks PBE-5AC-620 airMAX technology

Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method on the Ubiquiti Networks PBE-5AC-620 eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class. With Intelligent QoS priority assigned to voice/video for seamless streaming it is capable of high-speed, carrier-class links with long distance.

Ubiquiti Networks PBE-5AC-620 airMAX ac technology

The Ubiquiti Networks PBE-5AC-620 comes acked with the airMAX ac technology that boosts the advantages of proprietary TDMA protocol. Ubiquiti’s airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon on the Ubiquiti Networks PBE-5AC-620 provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

Ubiquiti Networks PBE-5AC-620 throughput breakthrough

The Ubiquiti Networks PBE-5AC-620 supports high data rates, which require dense modulation, 256QAM is a significant increase from 64QAM, which is used in airMAX. With the use of proprietary airMAX ac technology, Ubiquiti Networks PBE-5AC-620 products supports up to 450+ Mb/s real TCP/IP throughput up to triple the throughput of standard airMAX products.

Ubiquiti Networks PBE-5AC-620 has an innovative mechanical design

The mounting bracket of the Ubiquiti Networks PBE-5AC-620 offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt. Only a single wrench is required to mount the Ubiquiti Networks PBE-5AC-620 on a pole. The antenna feed can be detached with the push of a button. Ubiquiti Networks PBE-5AC-620 fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets are made of galvanized steel that is powder-coated for enhanced corrosion resistance. The Ubiquiti Networks PBE-5AC-620 has pole bracket designed to prevent paint from being removed from the metal brackets for improved corrosion resistance.