Description

D-Link upto 250 Meter support 24-Port 1000Mbps PoE Switch with 2 SFP Ports- DGS-F1026P-E24

The D-Link DGS-F1026P-E24 Port Switch with 10/100/1000Mbps and 2 SFP Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. The D-Link DGS-F1026P-E24 can also connect other Ethernet devices like computers, printers and a Network Attached Storage (NAS) to fit into any type of network application.

D-Link DGS-F1026P-E24 is a 24-port Gigabit Ethernet PoE (Power over Ethernet) switch with two SFP (Small Form-factor Pluggable) ports. The D-Link DGS-F1026P-E24 is designed to provide power and data connectivity to network devices such as IP cameras, wireless access points, and VoIP (Voice over IP) phones.

The D-Link DGS-F1026P-E24 switch supports a maximum transmission distance of up to 250 meters. This extended distance capability on the D-Link DGS-F1026P-E24 allows you to deploy PoE devices at a greater distance from the switch without the need for additional power sources.

The 24 ports on the D-Link DGS-F1026P-E24 switch are capable of delivering PoE power to connected devices, eliminating the need for separate power adapters or power injectors. Each port supports the IEEE 802.3af/at PoE standard, which can provide up to 30 watts of power per port.

The two SFP ports on the D-Link DGS-F1026P-E24 switch offer flexibility for network expansion and connectivity to other switches or devices over fiber optic cables. SFP ports allow for the use of different types of SFP modules, including multimode or single-mode fiber modules, to extend the network’s reach.

The D-Link DGS-F1026P-E24 also features various management and security features, including VLAN (Virtual Local Area Network) support, QoS (Quality of Service) prioritization, and IGMP (Internet Group Management Protocol) snooping for efficient multicast traffic handling.

It’s worth noting that while the D-Link DGS-F1026P-E24 supports a transmission distance of up to 250 meters, the actual achievable distance may vary depending on factors such as the quality of the cabling, environmental conditions, and power requirements of the connected devices.

D-Link DGS-F1026P-E24 is built for your need

D-Link DGS-F1026P-E24 offers robust and cost-effective PoE solution to provide power for your PoE powered devices such as IP cameras, CCTV, VoIP, AP etc.

D-Link DGS-F1026P-E24 offers up to 250m PoE and data transmission

Equipped with PoE extend technology, D-Link DGS-F1026P-E24 have the capability to supply 802.3af/at PoE up to 250m with data transmission. Cost saving for long distance solution.

D-Link DGS-F1026P-E24 ensures 6KV surge protection

The D-Link DGS-F1026P-E24 is enhanced with 6KV surge protection effectively guard equipment from lighting damage especially if use on AP/IP camera install outdoor or at higher position.

D-Link DGS-F1026P-E24 is enhanced with VLAN function

With a flick of button on your D-Link DGS-F1026P-E24, isolate the downlink port to each other can effectively suppress network storms and improve network performance.

D-Link DGS-F1026P-E24 ensures high transmission distance

With high distance connectivity, the D-Link DGS-F1026P-E24 is ideal for surveillance solution. Can be used with cat5e or cat6 cable. The D-Link DGS-F1026P-E24 features 24 ports 10/100BASE-TX ports that support the IEEE 802.3af/at PoE protocol. The D-Link DGS-F1026P-E24 also comes with total power budget of 250W.

D-Link DGS-F1026P-E24 allows plug & play installation

The D-Link DGS-F1026P-E24 is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. The D-Link DGS-F1026P-E24 comes with the 802.3x flow control on each port which minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices.

D-Link DGS-F1026P-E24 allows different switch working mode

The D-Link DGS-F1026P-E24 switch works in 4 operating modes using DIP switch:

• D-Link DGS-F1026P-E24 Extend – 1-8 ports support up to 250m distance power supply
• D-Link DGS-F1026P-E24 VLAN-Isolating ports 1-24 from each other can effectively suppress network storms and improve network performance
• D-Link DGS-F1026P-E24 QoS-Prioritize the identified video data to make video transmission smoother
• D-Link DGS-F1026P-E24 PoE-Automatic detection power of port, power off and restart